Author Topic: My 450Se 1977 project  (Read 1002 times)

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #45 on: 08 November 2018, 01:14 PM »
odd part 001-548-26-41 boxes in your picture.  EPC only shows used on 126, 107, 123 all japan versions.

can you post picture of exhaust temp signal on your dash?  never heard of that either.

Do you have your data card with option codes?  maybe something on there explains it.

I will post a picture tomorrow of the dash. I have a Japan version.

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #46 on: 09 November 2018, 04:39 AM »
odd part 001-548-26-41 boxes in your picture.  EPC only shows used on 126, 107, 123 all japan versions.

can you post picture of exhaust temp signal on your dash?  never heard of that either.

Do you have your data card with option codes?  maybe something on there explains it.


Here you are,

rumb

  • W116 Addict
  • ****
  • Posts: 1,167
  • MB Enthusiast
  • Location: Fort Collins, Colorado
Re: My 450Se 1977 project
« Reply #47 on: 09 November 2018, 04:58 AM »
Very interesting!

498 = Japan Version

'68 250S, '77 6.9 euro, '91 300SE, '98 SL500 '14 CLS550

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #48 on: 09 November 2018, 05:42 AM »
Very interesting!

498 = Japan Version

😊

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #49 on: 09 November 2018, 05:50 AM »
Startup today. Tried to have 20 min at 2000rpm for the new camshafts.
What is normal temperatur? Mine landed at about 80degrees celsius.

https://www.youtube.com/watch?v=Cw82ZVOPwfY&feature=share

rumb

  • W116 Addict
  • ****
  • Posts: 1,167
  • MB Enthusiast
  • Location: Fort Collins, Colorado
Re: My 450Se 1977 project
« Reply #50 on: 09 November 2018, 06:55 AM »
thermostat should be 87 degrees so yours is running fine.
'68 250S, '77 6.9 euro, '91 300SE, '98 SL500 '14 CLS550

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #51 on: 09 November 2018, 07:02 AM »
thermostat should be 87 degrees so yours is running fine.

Perfect :)

Thegger

  • Enthusiast
  • *
  • Posts: 56
  • W116 Enthusiast
  • Location: Norway
Re: My 450Se 1977 project
« Reply #52 on: 06 December 2018, 12:23 AM »
Next on to do list:
New flex discs
New propeller shaft bearing