Location, Location, Location.Please add your location to your profile. It will help others to help you!
Started by Mattr, 21 May 2022, 10:02 PM
Quote from: daantjie on 22 May 2022, 10:26 AMRobert I think you mean the drag link, right? If so indeed yes the 6.9 has a bespoke drag link slightly longer, I think 515mm pin to pin length.
Quote from: UTn_boy on 22 May 2022, 03:39 PMThe only things that connect to the upper control arm are the sway bar and spindle. How are we getting on the subject of drag links and idler arm bushings?
Quote from: daantjie on 22 May 2022, 08:11 PMMatt think maybe you mean "63"? The lower control arm bushing is composite but the yoke itself has a long solid bushing where it connects to the frame.
Quote from: UTn_boy on 24 May 2022, 10:24 AMThere should not be anything ground off of the cross bar to allow for clearance of the idler arm control bushing bolt. It sounds like the idler arm bushing housing and/or the frame rail has been severely bent in the previous wreck.
Page created in 0.040 seconds with 20 queries.