News:

The ORG - 100% FREE advice!

Main Menu

Spheres: Febi vs. OEM

Started by BCK1963, 13 September 2023, 02:48 AM

BCK1963

Hello,

on the occasion of a different discussion about the new MB original spheres being available again:

Appr. 2 years ago I replaced the spheres on my car with Febi 03279 in front and 03278 in rear.
As far as I rememeber the color code and the load indication of the rear ones was not exactly the same as on the spheres that I replaced but the load difference appeared negligible. I presumed that the sheres on the car were still the originals since I didn't find any records of a previous replacement. (Can they last that long? When I switched them they still were far from being hard).
I am thinking of buying a set of spares from Febi as they cost less than half the MB parts.
Can anyone confirm that the Febi specs are the same as the OEM parts or different?

    Thanks     Bernd
Bernd

1976 Merc 6.9   Magnetit blue

ptashek

The FEBI accumulators are nitrogen pre-charged to 75 bar (front) or 57 bar (rear).

I suspect that both the Febi and MB spheres are the same part, made by Corteco. That's the case with W124 SLS spheres.
1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE

daantjie

Sadly Corteco quality has also taken a big dump over the years :'(
Daniel
1977 450 SEL 6.9 - Astralsilber