Author Topic: Mercedes 6.9: Suspension strut overhaul  (Read 226 times)

jllgd

  • Enthusiast
  • *
  • Posts: 38
  • Location: Harbor City, CA
Mercedes 6.9: Suspension strut overhaul
« on: 05 September 2019, 03:28 PM »
Who would you contact in California or nearby, to overhaul your leaking Mercedes 6.9 suspension strut?
Any suggestions or recommendations?
Thanks

daantjie

  • W116 Addict
  • ****
  • Posts: 1,688
  • W116 Enthusiast
  • Location: Vancouver, BC, Canada
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #1 on: 05 September 2019, 03:33 PM »
Send them to Martin Werminghausen in Massachusetts.
Daniel
1977 450 SEL 6.9 - Astralsilber

jllgd

  • Enthusiast
  • *
  • Posts: 38
  • Location: Harbor City, CA
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #2 on: 05 September 2019, 04:51 PM »
Thanks! Yes, I know of Werminghausen.
But are there anyone with the expertise, perhaps in California?

rumb

  • W116 Addict
  • ****
  • Posts: 1,332
  • MB Enthusiast
  • Location: Fort Collins, Colorado
'68 250S, '77 6.9 euro, '91 300SE, '98 SL500 '14 CLS550

jllgd

  • Enthusiast
  • *
  • Posts: 38
  • Location: Harbor City, CA
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #4 on: 06 September 2019, 11:19 AM »
The above shop is in Florida.
They list repair service for front struts only.
Anyone have experience with them or know if they do the rear struts as well?

Are there any shops in California that can do a quick strut overhaul?
Thanks

jllgd

  • Enthusiast
  • *
  • Posts: 38
  • Location: Harbor City, CA
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #5 on: 08 September 2019, 07:58 PM »
Gents,
I am in a somewhat tricky situation.
My 1980 6.9 is at the SoCal Mercedes workshop.
They have suddenly verified that one of my rear suspension struts have a shaft leak, after being bench tested at a reputable Mercedes suspension repair shop.

So since we are taking the 6.9 on a 14 day road trip to Vancouver Canada later this week, I urgently need one rear strut in working condition.

Anyone here that are able to help me out? All suggestions appreciated!
Thanks

Randys01

  • Classic
  • **
  • Posts: 125
  • W116 Enthusiast
  • Location: adelaide australia
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #6 on: 09 September 2019, 12:10 AM »
there's leak and there's leaks. They nearly all leak one way or the other.!!.  if it can hold the car up over night  soldier on.!
A shaft leak implies it's escaping...weeping.  how fast ?  how visible? how quick is the reservoir going down? 
You have a couple of days to determine if it's a nuisance or game changing.
If it's obvious and a bad weep, and if you can't get a replacement strut, plan on another vehicle. 
These things don't go kaput over night.  I'm suggesting its a like a slow tyre leak.  damn nuisance but can be topped up to keep you going until you can get it fixed.

jllgd

  • Enthusiast
  • *
  • Posts: 38
  • Location: Harbor City, CA
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #7 on: 09 September 2019, 07:26 PM »
Thanks Randy,
Really appreciate your insight on this subject.
I just talked to the shop owner where my car is and he says now the same thing as you are saying.
It’s not really a big leak, more like weeping, as you say.
And car stays up for several days.
So we are inclined to do the road trip to Canada in the 6.9 as planned.

But I find it strange that there are not many who can overhaul these hydraulic struts.
Thanks

tcj

  • Classic
  • **
  • Posts: 141
  • W116 Enthusiast
  • Location: Germany
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #8 on: 10 September 2019, 01:16 AM »
as you want a nearby repair shop for the rare hydraulic shocks its no wonder its difficult to find one.
As Daniel wrote: best thing you can do is to send them to Martin Werminghausen.
112.021
116.028
116.036

oversize

  • W116 Addict
  • ****
  • Posts: 1,325
  • W116 Nut
  • Location: Melbourne, Australia
Re: Mercedes 6.9: Suspension strut overhaul
« Reply #9 on: 13 September 2019, 02:21 AM »
The hardest part is finding seal kits and it seems those that have found suppliers are rather secretive about their research.  I will DIY when I find a source for the seals.  And I will posting my sources here.

You have to keep in mind the factory never intended to repair the struts and it was a dark day when they became NLA and apparently all the tooling was destroyed by Sachs.  The least they could do is provide seals....

I hope the cells don't go the same way and become NLA.  No idea what I'd do then!
1979 6.9 #5541 (Red Bull)
1978 6.9 #4248 (Skye)
1979 6.9 #3686 (Moby Dick)
1978 6.9 #1776 (Dora)
1977 450SEL #7010 white -P
1975 450SEL #8414 gold -P