The Forum

Garage => Mechanicals => Topic started by: paraguaiano on 22 November 2022, 04:02 PM

Title: mercedes 280 se w116
Post by: paraguaiano on 22 November 2022, 04:02 PM
Hello everyone .
could someone help me understand where some vacuum tubes go, such as the one under the butterfly valve where does it arrive? thank you very much for your availability and help pietro from italy
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 22 November 2022, 04:04 PM
I forgot, the engine and a 1978 m110 k jetronic. thanks
Title: Re: mercedes 280 se w116
Post by: rumb on 22 November 2022, 06:03 PM
07.3-500 -

In manual. https://handbook.w116.org/Engine/110/07_3-MechElec/

Has vacuum line diagram.
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 23 November 2022, 10:30 AM
ciao vi mando le foto(http://img_20221123_103513)
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 23 November 2022, 10:31 AM
(http://img_20221123_103513)
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 23 November 2022, 04:18 PM
sorry, can you tell me how can I insert the photos? I don't understand how to do it. thanks for your cooperation
Title: Re: mercedes 280 se w116
Post by: rumb on 23 November 2022, 07:11 PM
You need to click the Reply Button, not use the Quick Reply form that automatically shows up.  Then click on the Attachments and other options at the bottom of form.
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 01 December 2022, 03:33 AM
hello everyone, unfortunately I was not able to insert the photos. OK it is not a problem.
only now I need some essential information. Could someone tell me how many NM you have to tighten some screws? type how many nm, with the torque wrench do you have to tighten the screws of the water pump? Or the pulley under the water pump? Or the oil pan bolts? Finally, which oil is suitable for the engine? we are talking about a 2800 cc mercedes m110 engine. Thanks a lot everyone for any responses. Hello
Title: Re: mercedes 280 se w116
Post by: Jan S on 01 December 2022, 06:26 PM
Quote from: paraguaiano on 01 December 2022, 03:33 AMhello everyone, unfortunately I was not able to insert the photos. OK it is not a problem.
only now I need some essential information. Could someone tell me how many NM you have to tighten some screws? type how many nm, with the torque wrench do you have to tighten the screws of the water pump? Or the pulley under the water pump? Or the oil pan bolts? Finally, which oil is suitable for the engine? we are talking about a 2800 cc mercedes m110 engine. Thanks a lot everyone for any responses. Hello

I use Liqui Moly for my 6.9

Liqui Moly recommends the same oil type for your engine (https://www.liqui-moly.com/no/no/mos2-leichtlauf-10w-40-p000207.html#2626).

This is my preference.
Title: Re: mercedes 280 se w116
Post by: paraguaiano on 02 December 2022, 09:38 AM
Thanks you!!
Title: Re: mercedes 280 se w116
Post by: Taha on 07 December 2022, 09:06 PM
Hi,

Check the photos below.
Document numbers:

01-310 Complete removal and installation of oil pan
20-210 Removal and installation of water pump
03-340 Removal and installation of pulley, Vibration and balancing disc

Title: Re: mercedes 280 se w116
Post by: paraguaiano on 13 December 2022, 11:42 AM
thanks you