News:

The ORG - No back-slapping boys club!

Main Menu

M110 Oil pressure line

Started by PerthSteve, 20 January 2024, 12:36 AM

PerthSteve

Hi guys, after some technical advice...Swapped my old M110 engine for a replacement. Newer engine had oil cooler mine didn't. I swapped the oil filter housing and deleted the cooler lines but now i am not getting oil pressure at the gauge. Took off the line where it connects to the filter housing and ran the engine. No oil came out of the hole? Am I missing something??

nathan

Hi Steve,
Nathan from Perth.  I cant help with this one but saw your post on another social site.  I would suggest if you get stumped, try the star shop in Osborne park.  Whilst not necessarily the MB centre I would use, they do know about older MBs better than most.  If you are south of the river, perhaps Trent at Star & Circle could also help. 
1979 116 6.9 #6436
2018 213 e63
2011 212 e63
2011 463 g55
2007 211 e500 wagen
1995 124 e320 cabriolet
1983 460 300gd
1981 123 280te

PerthSteve

Thanks Nathan,  I solved the problem.  The filter housing was blocked where the pressure line goes to the gauge. Its my little project so trying to do everything myself. Have her running sweet now. Rust repairs next. Cheers mate.