www.W116.orgAll about the Car!
Started by brettj, 20 August 2010, 09:43 PM
Quote from: brettj on 20 August 2010, 09:43 PMI've come to the conclusion that the warm start stall is caused by incorrect dwell.
QuoteI put my dwell meter on the car today to find that the dwell was set to 65.
QuoteI rechecked the dwell and found the dwell is now set to 15.
QuoteDo you really need that condenser?
Quote from: brettj on 21 August 2010, 11:57 AMMy car has the transistor starting system. So I guess that I do not need the condenser.
Quote from: brettj on 22 August 2010, 05:00 PMIs there a screw to play with to adjust the points or is it the same screw that you tighten to hold down the point set?
QuoteMy distributor will only rotate a small distance with the clamping screw loosened. Do you just loosen the clamping screw or remove it all together to be able to completely rotate the distrubutor?
Page created in 0.039 seconds with 22 queries.