www.W116.orgAll about the Car!
Started by jjccp, 12 June 2019, 08:41 AM
Quote from: nathan on 12 June 2019, 04:41 PMreplace your striker. when you do this, ;pencil outline where the original was so you can put the other one on at the same position and its already aligned.
Quote from: revilla on 12 June 2019, 02:42 PMHiI would remove the door handle to gain more visibility on the latching mechanism from the inside. I understand the visibility from the outside is limited.Removing the handle is relatively easy. Remove the plastic plug on the side close to the latch. You will see 2 allen bolts, unscrew. Careful not to drop them. The 1 fat screw right at the handle. Slide the handle backward. Now pull the handle perpendicular to the door. With the help of a flashlight you will see the insides. Try playing with the internal handle to see if things improve. Clean and oil the moving parts. If something is broken you should be able to see from that angle.There's also an adjustment (1 flat screw) at the handle itself next to the weight. It changes the force/displacement needed to unlatch and open the door: Once you see it you will understand the logic for the adjustments.Good luck.
Page created in 0.307 seconds with 20 queries.