Author Topic: Help-I can't close my drivers door  (Read 1657 times)

revilla

  • Classic
  • **
  • Posts: 394
  • W116 Enthusiast
  • Location: Aix-en-Provence, France
Re: Help-I can't close my drivers door
« Reply #15 on: 27 June 2019, 12:10 AM »
Hello Diesel,

I'm not familiar with the shims.  Where are they located and what's their role, to align what?  Maybe shimming is complementary to the handle adjustment to arrive at a perfect opening/closing door.

Thanks in advance

Robert

Robert
W116 1977 280SEL & 1979 280SE

Diesel 617

  • Classic
  • **
  • Posts: 234
  • Location: Illinois
Re: Help-I can't close my drivers door
« Reply #16 on: 27 June 2019, 11:31 AM »
Between the  Locking Eye Striker and the door frame it self there is a thin piece of metal shim, if you remove the eye striker the shim is right there. Take one off another door and see if two makes it any better. When adjusting it tighten the bolts but make sure the striker can self adjust when the door is fully closed. Once adjusted crank the bolts down and your set.

This thread: https://forum.w116.org/mechanicals/one-finger-door-close/
X3 1980 300SD Blown Heads, trans -Retired
1980 450SEL Parted out/Scrap
1980 450SEL to Diesel Parted Out/Scrap
1979 280SE Euro Spec Cloth Seats Sold
1979 300CD Daily Driver - Sold


Inventory of w116 Parts
https://www.ebay.com/usr/vintagepartsandstuff

revilla

  • Classic
  • **
  • Posts: 394
  • W116 Enthusiast
  • Location: Aix-en-Provence, France
Re: Help-I can't close my drivers door
« Reply #17 on: 27 June 2019, 12:02 PM »
Ok thanks.
I’ll check that out.
R
Robert
W116 1977 280SEL & 1979 280SE

Diesel 617

  • Classic
  • **
  • Posts: 234
  • Location: Illinois
Re: Help-I can't close my drivers door
« Reply #18 on: 27 June 2019, 08:16 PM »
If they are NLA I have thick and thin shims I can ship to people.
X3 1980 300SD Blown Heads, trans -Retired
1980 450SEL Parted out/Scrap
1980 450SEL to Diesel Parted Out/Scrap
1979 280SE Euro Spec Cloth Seats Sold
1979 300CD Daily Driver - Sold


Inventory of w116 Parts
https://www.ebay.com/usr/vintagepartsandstuff

buki5

  • Newbie
  • Posts: 4
  • W116 Enthusiast
  • Location: OH
Re: Help-I can't close my drivers door
« Reply #19 on: 04 October 2021, 06:20 PM »
So I read through this thread and it is right on my topic. 

My drivers door has to be slammed to shut.  I've looked at all my doors, latches, strikers etc.  Finally, think I see what is happening...not sure what the solution might be.

On the drivers door looking at the bottom of the striker mounted on the door frame.  There is a little box that is cut out of the striker.  The latch basically hits the front of the striker, the the latch rotates and has a protrusion that comes around and sticks into the box that's cut out.  One "click" is the initial lock, 2 "clicks" is the door fully shut.  What I am seeing is shavings of metal on the latch part that rotates and two small parallel grooves getting cut into the back of the striker (back of the cut out box).

Now it looks like the latch used to have plastic protrusions, if so, they appear to have been to soften the mechanism when closing the door.  In any case the latch is coming around and cutting metal out of the striker.

Does anyone have an idea on how to solve this?  At first I thought I might be able to adjust the striker back a little.  However, that wouldn't matter as the rotating assembly still moves the same distance.  Any ideas appreciated.

ptashek

  • W116 Addict
  • ****
  • Posts: 2,190
  • W116 owner
  • Location: Ireland
    • History of ZV9485
Re: Help-I can't close my drivers door
« Reply #20 on: 05 October 2021, 12:35 AM »
Had the same problem. What I've done is copy the plastic "bumper", which I've then 3D printed and epoxied in place. After that I've adjusted the door as the factory intended, and it's been working great for at least a year now.
1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE (history, resto)

buki5

  • Newbie
  • Posts: 4
  • W116 Enthusiast
  • Location: OH
Re: Help-I can't close my drivers door
« Reply #21 on: 05 October 2021, 06:44 AM »
Thanks ptashek.  rough dimensions for the "bumper". They're missing from all of my doors.  An alternative I was tossing around is to attach a small thin plate to the front of the striker as a "build out" to it would also provide a bushing like face between the aluminum striker and the hard steel latch.  Thoughts?

TNNBENZ

  • Enthusiast
  • *
  • Posts: 74
  • Vintage Enthusiast
  • Location: America
Re: Help-I can't close my drivers door
« Reply #22 on: 05 October 2021, 09:58 AM »
 I have a back door that will not OPEN.  I will see if any of this advice will help me OPEN my door............. ha........Thankx ~~~
Neglected ~ Rescued ~ 1977 450SEL 4.5L 
Project of Compassion
Silver Green/Metallic
Left Hand Drive ~ Retractable Roof

ptashek

  • W116 Addict
  • ****
  • Posts: 2,190
  • W116 owner
  • Location: Ireland
    • History of ZV9485
Re: Help-I can't close my drivers door
« Reply #23 on: 05 October 2021, 02:11 PM »
Thanks ptashek.  rough dimensions for the "bumper". They're missing from all of my doors.

It's tiny. Like really tiny :)

1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE (history, resto)

ptashek

  • W116 Addict
  • ****
  • Posts: 2,190
  • W116 owner
  • Location: Ireland
    • History of ZV9485
Re: Help-I can't close my drivers door
« Reply #24 on: 05 October 2021, 02:15 PM »
Here is the finished product. Works like a charm.
1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE (history, resto)

buki5

  • Newbie
  • Posts: 4
  • W116 Enthusiast
  • Location: OH
Re: Help-I can't close my drivers door
« Reply #25 on: 16 October 2021, 10:26 AM »
Thanks ptashek.  That looks exactly right.  Did you use any particular epoxy?  I have some West Systems here and cheap Harbor Freight 5 min. 

ptashek

  • W116 Addict
  • ****
  • Posts: 2,190
  • W116 owner
  • Location: Ireland
    • History of ZV9485
Re: Help-I can't close my drivers door
« Reply #26 on: 16 October 2021, 01:04 PM »
Just standard 2-part epoxy glue
1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE (history, resto)

TNNBENZ

  • Enthusiast
  • *
  • Posts: 74
  • Vintage Enthusiast
  • Location: America
Re: Help-I can't close my drivers door
« Reply #27 on: 16 October 2021, 02:43 PM »
       These post are very impressive.  You guys are very smart....did you Mercedes anyone ???
Neglected ~ Rescued ~ 1977 450SEL 4.5L 
Project of Compassion
Silver Green/Metallic
Left Hand Drive ~ Retractable Roof