News:

The ORG - No shonky business!

Main Menu

Front Caliper needed - Correct part confusion?

Started by carzilike, 22 October 2023, 11:35 AM

ptashek

Switch to K-Jet for the 280SE happened in February 1976, as per official documents. It wasn't done for all models at the same time - a common misconception. The switchover started around July 1975, for MY76 cars.

So your car could have rolled off the line in early 1976, and that's where the mystery ends :)
1993 "Pearl Blue" W124 280TE
1988 "Arctic White" W124 200T
1979 "Icon Gold" W116 450SE

revilla

Hi Lukas,
Thanks for adding documented facts into the exchange. That's great.
Then, car is definitely not a 1977 (as stated) which originated the confusion for ordering parts that didn't fit.
To answer the question above, yes, the dataplate states it's a 280SE (116024). This model was in production from 1972 until 1980.
Serial number in that dataplate is 5477 for that production year run, which implies production around March-May of that year (approximation).
Bottom line question still remains, what calipers to order?
A visual inspection of them should close this mystery. TBC.

Alec300SD

Front brake caliper bolt MB # 123-421-02-71.

If you have brake pads mounted in the other front caliper you can determine if it is ATE or Bendix by the style of retaining clips.
Bendix uses two wires, and ATE uses a cross shaped spring steel clip.

I would recommend the ATE calipers as they are more readily available.
ATE retaining clips
Bendix retaining clips
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022

carzilike

Quote from: ptashek on 28 October 2023, 06:54 AMSwitch to K-Jet for the 280SE happened in February 1976, as per official documents. It wasn't done for all models at the same time - a common misconception. The switchover started around July 1975, for MY76 cars.

So your car could have rolled off the line in early 1976, and that's where the mystery ends :)

Thank you for clarifying!

carzilike

Quote from: Alec300SD on 28 October 2023, 10:56 AMFront brake caliper bolt MB # 123-421-02-71.

If you have brake pads mounted in the other front caliper you can determine if it is ATE or Bendix by the style of retaining clips.
Bendix uses two wires, and ATE uses a cross shaped spring steel clip.

I would recommend the ATE calipers as they are more readily available.
ATE retaining clips
Bendix retaining clips

Thank you, do you have a link or part number for the ATE calipers?

carzilike

Quote from: revilla on 28 October 2023, 08:06 AMHi Lukas,
Thanks for adding documented facts into the exchange. That's great.
Then, car is definitely not a 1977 (as stated) which originated the confusion for ordering parts that didn't fit.
To answer the question above, yes, the dataplate states it's a 280SE (116024). This model was in production from 1972 until 1980.
Serial number in that dataplate is 5477 for that production year run, which implies production around March-May of that year (approximation).
Bottom line question still remains, what calipers to order?
A visual inspection of them should close this mystery. TBC.

What should be inspected on the caliper to determine which part I should order? Size?
I am wondering if I Should order this part: https://www.fcpeuro.com/products/mercedes-disc-brake-caliper-centric-14135029

carzilike

When I look up parts under 1976 on RockAuto - All i see is the 280S and not the SE

Am I correct in assuming that this is the correct part which says it applies to vehicles dated 07/75
https://www.rockauto.com/en/moreinfo.php?pk=9745100&cc=1193329&pt=1704&jsn=1494
NUGEON 9702821B
{Alternate Inventory Numbers: 97-02821B, 2202821R}

The one I ordered previously was the part above this which is also showing up for 1976 and applies to vehicles From 08/75

Or am I wrong again?

andrewk

Quote from: carzilike on 29 October 2023, 09:40 PMWhen I look up parts under 1976 on RockAuto - All i see is the 280S and not the SE

Am I correct in assuming that this is the correct part which says it applies to vehicles dated 07/75
https://www.rockauto.com/en/moreinfo.php?pk=9745100&cc=1193329&pt=1704&jsn=1494
NUGEON 9702821B
{Alternate Inventory Numbers: 97-02821B, 2202821R}

The one I ordered previously was the part above this which is also showing up for 1976 and applies to vehicles From 08/75

Or am I wrong again?

Nugeon is not an ATE or Bendix part. Suggest Pelican Parts, Mercedes Classic Center or AutohausAZ. Alternatively, find a pair of genuine callipers from a wrecker and have them rebuilt by a brake shop using the correct parts.
1979 450 SEL 6.9 (#5532) - silbergrün metallic

Alec300SD

Quote from: carzilike on 29 October 2023, 09:28 PM
Quote from: Alec300SD on 28 October 2023, 10:56 AMFront brake caliper bolt MB # 123-421-02-71.

If you have brake pads mounted in the other front caliper you can determine if it is ATE or Bendix by the style of retaining clips.
Bendix uses two wires, and ATE uses a cross shaped spring steel clip.

I would recommend the ATE calipers as they are more readily available.
ATE retaining clips
Bendix retaining clips

Thank you, do you have a link or part number for the ATE calipers?
Answered by ptashek earlier.
Note:  ATE = TEVES
Quote from: ptashek on 22 October 2023, 12:47 PMFront left: A1164200083 (Teves) / A1164200283 (Bendix)
Front right: A1164200183 (Teves) / A1164200383 (Bendix)

Search google without the "A" in the part number and the calipers pop up on the pelicanparts.com website.
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022

carzilike

Quote from: andrewk on 29 October 2023, 10:26 PM
Quote from: carzilike on 29 October 2023, 09:40 PMWhen I look up parts under 1976 on RockAuto - All i see is the 280S and not the SE

Am I correct in assuming that this is the correct part which says it applies to vehicles dated 07/75
https://www.rockauto.com/en/moreinfo.php?pk=9745100&cc=1193329&pt=1704&jsn=1494
NUGEON 9702821B
{Alternate Inventory Numbers: 97-02821B, 2202821R}

The one I ordered previously was the part above this which is also showing up for 1976 and applies to vehicles From 08/75

Or am I wrong again?

Nugeon is not an ATE or Bendix part. Suggest Pelican Parts, Mercedes Classic Center or AutohausAZ. Alternatively, find a pair of genuine callipers from a wrecker and have them rebuilt by a brake shop using the correct parts.

Nugeon and CARDONE are rebuilding / rebfurbing ATE / BENDIX calipers
The one I bought is stamped BENDIX as a factory unit and was rebuilt
These companies not not manufacturing these parts, they are simply refurbishing them
Note the photo attached of the Nugeon caliper I ordered which has BENDIX STAMP on it

carzilike

Quote from: Alec300SD on 30 October 2023, 12:29 AM
Quote from: carzilike on 29 October 2023, 09:28 PM
Quote from: Alec300SD on 28 October 2023, 10:56 AMFront brake caliper bolt MB # 123-421-02-71.

If you have brake pads mounted in the other front caliper you can determine if it is ATE or Bendix by the style of retaining clips.
Bendix uses two wires, and ATE uses a cross shaped spring steel clip.

I would recommend the ATE calipers as they are more readily available.
ATE retaining clips
Bendix retaining clips

Thank you, do you have a link or part number for the ATE calipers?
Answered by ptashek earlier.
Note:  ATE = TEVES
Quote from: ptashek on 22 October 2023, 12:47 PMFront left: A1164200083 (Teves) / A1164200283 (Bendix)
Front right: A1164200183 (Teves) / A1164200383 (Bendix)

Search google without the "A" in the part number and the calipers pop up on the pelicanparts.com website.

Already tried googling these part numbers and anything i found was insanely expensive to ship to canada or was not available for shipping to canada or was not in stock. Pelican parts says "No Longer Available"

Hence I am still searching for what to order. the Link I shared for the part from Rockauto / FCPeuro are my only two options at this point unless someone else can share a third option?

carzilike

I found a good selection on this website under 1977 280SE. But most of them are not in stock or special order only.
Based on my data plate, should I be searching under 1977 280SE or 1976 280S?

https://www.summitracing.com/search/part-type/brake-calipers/year/1977/make/mercedes-benz/model/280se?N=caliper-position%3Afront-right

rumb

'68 250S
'77 6.9 Euro
'91 300SE,
'98 SL500
'14 CLS550,
'16 AMG GTS
'21 E450 Cabrio

andrewk

Have you tried contacting a wrecker or Mercedes Classic Center?
1979 450 SEL 6.9 (#5532) - silbergrün metallic