Thought I'd pass on my "Ooops" for those out there changing out wiper arms. FYI: Do yourself a favor and make sure when you are installing the wiper arms back on to the car to have a blade on it so when it springs back it does not crack the windshield! This crack is just big enough that I'll have to replace the windshield. I was meaning to change out the original windshield seal anyway now I have a reason to do it! I'm looking at about 300.00 US from Safelite Auto Glass to get it done with installation and cost of replacement windshield.
Quote from: 1974450SEL on 30 March 2010, 09:12 AM
Thought I'd pass on my "Ooops" for those out there changing out wiper arms.
That's not good!
I'd have said a few words out loud on making that mistake.
koan
Quote from: 1974450SEL on 30 March 2010, 09:12 AM
I'm looking at about 300.00 US from Safelite Auto Glass to get it done with installation and cost of replacement windshield.
I truly hope you have better results with Safelite than I did on my 300SD. I provided an OEM seal and when they were done with the car (took about 3 hours) the seal was torn up. It leaked even after taking it back 5 times so I ended up buying a tube of 3M Bedding Compound and filled all of the gaps. This was after I had somewhere else replace the windshield and I thought the poor job was due to an aftermarket seal, but using an OEM seal was no better! The next time I am doing the job myself.