My 73' 450se must be an early chassis model because I can't find a replacement turn signal switch for it. Would anyone know of a source or repair for these guys. Thanks
Rob Smith
Hi,
You probably have the same type as mine with the screen washer control not with the stalk
but with a button on the floor.
If the problem is that the turn signal stalk will not stay in the position it is put when signaling I saw
somewhere where you can grind a deeper groove in part of the assembly that rectifies the problem.
I will see if I can find the reference.
Regards,
Bill
https://forum.w116.org/mechanicals/turn-signal-switch/
Explains everything.