Author Topic: 6.9 starter  (Read 4972 times)

nathan

  • W116 Addict
  • ****
  • Posts: 1,810
  • Location: perth, western australia
Re: 6.9 starter
« Reply #45 on: 17 November 2021, 12:12 AM »
ha ha, no worries Matt. I thought this post was dead and buried! It looked odd to me in that there are two larger wires on the one bolt with the 13mm nut.  the two different screw heads should prevent you getting them the wrong way around.  you can always try starting it without actually fitting it into the bell housing and ring gear I suppose. I need to buy a new solenoid for my old starter to repair it. good luck matt
6.9 79 #6436
6.9 79 #6290
6.9 79 #6181
6.9 78 #4764
6.9 77 #3096
6.9 76 #1741
6.9 76 #0902
6.9 75 #0018