The ORG - Truly Independent and Unbiased!
Started by SteveDuNord, 04 May 2022, 10:57 AM
Quote from: raueda1 on 11 September 2023, 07:49 AMI don't recall ever seeing anything like that bottom pic. In any case, there's a critical order to the setup. Have a look at THIS if you haven't already, page 2 in particular. My problem turned out to be something else, but it's still good for WUR info. In outline the process is: First is getting hot pressure right with the big cylindical valve body. The thermoactivator needs to be removed. Second is setting cold pressure using the indented plug on the top of the WUR with thermoactivator reinstalled. Last, vac enrichment, the bottom one is vacuum enrichment and acts only on the diaphragm in the lower chamber. I think there's a thread on that. It's easy to overdo it. S Class says that doing so will wreck to diaphragm. Good luck! Cheers,
Quote from: Feather535 on 17 September 2023, 09:53 AMI would advise going back to the beginning. System pressure is set by the primary pressure regulator in the FD? Is it assembled correctly? Are all the springs and o-rings in the right places?
Page created in 0.039 seconds with 24 queries.