Please add your location to your profile. It will help others to help you!
Started by raueda1, 23 August 2023, 09:59 AM
Quote from: rumb on 23 August 2023, 12:25 PMMany versions exist!Besides the 2nd one in you mention, there are some with one on the very outer. NAPA probably has some sort of socket that you would fit and add wires. The wiring connector has differences as well as right/left.
Quote from: mrkozzy on 25 August 2023, 11:14 AMFWIW, I replaced rear bulbs with LED lamps except for the blinker. I wasn't confident that LED bulbs would work with the blinker relay. It seems that often it's necessary to add a resistor and I was too lazy to pursue that. But maybe 2 LED bulbs would work for the blinkers? If anybody has tried, it would be nice to know. Thoughts welcome! I changed all my bulbs to LED some time ago, inside and out. Can confirm the rear blinkers should work without the resistor, Not so the front. Go figure. Anyway adding resistors turned out to be such a simple task, it was well worth it.I've uploaded a picture of 1 of 2 resistors I installed on each of the front blinkers, just for reference,
Page created in 0.045 seconds with 21 queries.