Hirshmann antennae wiring

[rumb]

Does anyone have the wiring diagram from radio to antennae?

The 6.9 diagram only shows the radio but not the antennae.

Trying to test a unit.  Motor works, but I can only get to run one direction when applying voltage to pins on connector.  Motor does spin both ways but only by probing internal wires.

[UTn_boy]

I believe this is one of those annoying things that Mercedes never supplied a diagram for....much like the VDO CC amps.  I'm certain that Hirshmann would have had their own schematics, but I've never seen one for the public.  It' kind of dumb since Becker always supplied a schematic for what ever model of radio the car came with. 

When looking around, bear in  mind that there were three different versions of the electric antenna that were used.  Granted, they all worked the same, but what I'm referring to is how.  The first versions worked in tandem with the radios on/off switch.  The second versions had a rocker switch on the dash that allowed for control over how high or low it was, and the last version also had a rocker switch, but in addition to having control over height, the switch had full left and full right detents to keep the mast up all the way at all times when the radio was switched on or all the way down all of the time....even if the radio was on.  The latest ones had a four pin connection instead of the regular 3 pin connection.....that may be the difference between the 6000H and the 6000U....just a guess, though.

I realize that all of what I've written may not be of much use or help to you.  I just wanted to point out that if someone has drawn out a schematic somewhere, just make sure it matches the electrical set up in your car. 

[rumb]

Good info.  I did further search and found good info in older posts on subject that answered my question.