News:

www.W116.org - All about the Car!

Main Menu

Gasket for hydro tank/inner fender

Started by rumb, 23 October 2023, 01:19 PM

rumb

ptashek,  Ran across an old post where you mention 3d printing rubber items.  Is this a part you have done or could do?

Thanks,
Robert
'68 250S
'77 6.9 Euro
'91 300SE,
'98 SL500
'14 CLS550,
'16 AMG GTS
'21 E450 Cabrio

raueda1

Are you talking about gasket around filler neck on the oil tank or the gasket on hydraulic tank under the valve body?
-Dave
Now:  1976 6.9 Euro, 2015 GL550
Before that:  1966 230S, 1964 220SE coupe, 1977 Carrera 3.0

rumb

The filler neck rubber o-ring gasket.
'68 250S
'77 6.9 Euro
'91 300SE,
'98 SL500
'14 CLS550,
'16 AMG GTS
'21 E450 Cabrio

raueda1

Quote from: rumb on 24 October 2023, 09:42 AMThe filler neck rubber o-ring gasket.
[/quote77
Quote from: rumb on 24 October 2023, 09:42 AMThe filler neck rubber o-ring gasket.
There's A remote but non-zero chance I have one someplace.  I'll keep my eyes open but keep expectations low....
-Dave
Now:  1976 6.9 Euro, 2015 GL550
Before that:  1966 230S, 1964 220SE coupe, 1977 Carrera 3.0