Hi Guys,
Now that my spraying seems to be heading into more positive territory here are some pictures of my weekends work.
I sanded off most of the original primer and started again with 2 coats of Lesonal then did a light sand with 400 dry and have given it another 2 coats of Lesonal.
Before doing this I caught up with my door shuts and primered these.
There are a couple of very small sags that I will tidy up before spraying a guide/tack coat of 90%/10% thinners/black acrylic lacquer.
For the technical I am using the aforesaid HVLP gun with the compressor regulator set at 100PSI and the gun set at 60 PSI - my compressor seems to be able to cope with it with no major problems.
If the images come through too small the full sized ones are available in the garage.
(http://gallery.w116.org/dl/9669-3/Lesonal3.jpg)
(http://gallery.w116.org/dl/9663-3/Lesonal+2.jpg)
(http://gallery.w116.org/dl/9659-3/Lesonal1.jpg)
Back to the sanding when I have time and my Carpal Tunnels let me.
Bill