Author Topic: Becker mexico belt replacement  (Read 147 times)

janiak5

  • Newbie
  • Posts: 2
  • W116 Enthusiast
  • Location: Poland, Olsztyn
Becker mexico belt replacement
« on: 09 May 2021, 10:01 AM »
Hello everyone.
This is my first time in this forum. I'm looking for a drawing on how to mount a belt / belts on a Becker mexico cassette radio. I bought a set with 2 belts at an auction. I can't install these belts properly. Is this the correct way to mount with only 1 belt?

Taha

  • Enthusiast
  • *
  • Posts: 22
  • W116 Enthusiast
  • Location: Iran
Re: Becker mexico belt replacement
« Reply #1 on: 09 May 2021, 04:45 PM »
Hi and welcome.

Mine is like this:
1978 280S

janiak5

  • Newbie
  • Posts: 2
  • W116 Enthusiast
  • Location: Poland, Olsztyn
Re: Becker mexico belt replacement
« Reply #2 on: 10 May 2021, 03:27 AM »
Thanks You for the answer, but I thing I have different mechanism.
My mechanism looks like this. I drew how I think I have to wear belts :) What do You think about it?

floyd111

  • W116 Addict
  • ****
  • Posts: 2,797
  • Squiggle fan
  • Location: taiwan
Re: Becker mexico belt replacement
« Reply #3 on: 10 May 2021, 03:55 AM »
I think you should start with listing your exact machine type and then look for specific manuals online.
I just tried the first of many sites for you and it works without tricks, this one.
But, there are many others.
https://elektrotanya.com/becker_mexico-2000-cc_1430_1431_1432_1433_1434_1435_1436_1450_1451_full.pdf/download.html#dl

Once you have the manual, you should have either the full description or even better, the part number, that should give you more leads.