Air filter hose for djet 280

[jjb-w116-hu]

ohhhh and the cover as well? sounds nice to me -

thanks Joe!

[jjb-w116-hu]

hi Joe, how much for #174? :)mine is starting to wear....
thanks mate

[jbrasile]

James

Item 174 - 123 267 01 97 - $4.41 (4.90 list)

Tks

Joe

[Kris P.]

Hi joe,

Parts 632, 83 and 645 are the ones im looking for.  I need three of those 632's .  The fnder liner would be the plastic covering the fender from underneath that covers the wheel arc from water spray and debris.  I think there's also one at the rear end portion of the front fender htat is made of metal.  As for the tach, yup, its you can qupte me the tach that would be great... mine's just a big old clock.

Hi Kris,

1)Glove box - NLA, sorry...
2) Shifter lens - 000 260 09 72 - $266.40
3) Fender liner upper - pls clarify
4) Fender liner lower - pls clarify - would this be the vertical plastic cover under the fender behind the front wheels?
5)  Harness for d-jet 280 - need VIN # to check availability
6) Instrument cluster - I can quote you just the tach, is that it?
7) Plastic/urethane Bushing for the accelerator (where ball linkage attaches to at the top of the intake manifold of the djet, they are worn out) - 115 072 04 50 x 4 or 6 - will advise price - see image below and confirm if it is item 632



Accelerator rod  ball bushing that holds it in place at the engine firewall where the spring pushes against from the rod (lost in during my engine rebuild) - 109 301 00 51 - will advise price - see image below and confirm if it is item 83



9) THe rectangular rubber part  in between the two accelerator rod parts (seen on top of the intake manifold when you are looking at the accelarator rod and linkages) that is seen being as the damper of those two parts - 110 070 17 21 - will advise price - see image below an confirm if it is item 645



Tks,

Joe

[jbrasile]

Hi Kris,

Sorry for the delay, here are the prices requested:

Item 632 - 115 072 04 50 - $2.43 x 3 ( 2.70 list)
Item 645 - 110 070 17 21 - will advise
Item 83 - 109 301 00 51 - $2.70 (3.00 list)
116 884 05 35 - plastic cover under fender LH - $28.80 (32.00 list)
116 884 06 35 - plastic cover under fender RH - $28.80 (32.00 list)
110 884 00 98 - seal for covers under fender - $8.33 (9.25 list)
001 542 59 16 - tach - $403.20 (448.00 list) - ooouch..... better get one on e-bay....

The only covers under the front fenders are the ones quoted, the go vertically at  the rear of the wheel well and are held in place by 4 or 5 8mm bolts, they each use a seal between the inner part of the fender and the covers.

Tks,

Joe

[jbrasile]

Hi Kris,

Item 645 - 110 070 17 21 - $175.50 (195.00 list)

Tks,

Joe

[Kris P.]

Hi Joe,

I would like to see the pic of the fender liners just to be sure and the seal for covers inder fender

116 884 05 35 - plastic cover under fender LH - $28.80 (32.00 list)
116 884 06 35 - plastic cover under fender RH - $28.80 (32.00 list)
110 884 00 98 - seal for covers under fender - $8.33 (9.25 list) (is this a pair already or there are separate ones for the left and right wheel,  I remember a stell piece that's bolted on the an 8mm nut that sits vertically to voer the inner side of the fender towrds the doors...is this that piece?)

Im planning to order them already from you along with these other parts listed below:

110 094 03 91 - air filter hose - $45.00
109 301 00 51  -- accelerator ball bushing
115 072 04 50 x  6 -- acclerator rod bushing (plastic/urethane)

As for headlight bezels for the US version headlights, are they expensive? how much do they cost?

To sum up, I would like to know how many days would it take for these parts to arrive in Manila and how much shipping am I looking at?

Please advise.

Thanks!

Kris P.

[jbrasile]

Hi Kris,

I will post the pictures tomorrow, it's late here in Los Angeles....

The headlight surrounds are:

116 826 03 89  - LH - 90.00
116 826 04 89 -  RH - 90.00

Shipping to Manila should be about $100.00

Some of the parts will need to be ordered from Germany but the Classic Center gets them pretty quick for us, so figure about 7-10 days to ship.

Let me know.

Tks,

Joe

[Kris P.]

O then, let me know.... THanks!

[jbrasile]

Hi Kris,

Here is a picture of the fender covers and seals, items 100 and 104.



Let me know,

Tks,

Joe

[Kris P.]

Hi Joe,

I would like to order the following items from you.

1 287 013 003 - injector connector repair kit - $19.00ea x 6 (please ensure this is the right repair kit for the connector for my djet injectors.  it looks as if it were the ones in the japanese cars but hope it fits the original bosch injectors because the original ones are of different form, let me know ...)
110 094 03 91 - air filter hose - $45.00 (for djet with hose inlets for the aav)
109 301 00 51  -- accelerator ball bushing
115 072 04 50 x  6 -- acclerator rod bushing (plastic/urethane
116 826 03 89  - LH - 90.00
116 826 04 89 -  RH - 90.00

How can I order these from you, how many days would it take and shipping cost for these items?

Will wait for your reply...
thanks.

KRis P.

[jbrasile]

Hi Kris,

Pls send and e-mail to joe@mbklassik.net with your full name, address and phone number in Manila.

I will order all the parts from the Classic Center and before we ship I will call you to get your credit card info and that way you don't have to put it on an e-mail.

It should take a week to 10 days for the order to ship since some of the items have to come from Germany. We will use Fedex and I am pretty sure the cost will not be more than US$50-65.

Tks,

Joe

[Kris P.]

Hi Joe,

That would be great.  As for the fuel injector connector, hope you could let me know if its the right piece for my bosch injectors.

Will give you an email in a bit.

Thanks.

KRis P.

[Kris P.]

HI Joe,

I almost forgot, can you also give me the price of the hose clamps that's used in the air filter, the original ones...  I need two, the one in the mouth of the throtle body and the other one for the air filter casing.

Thanks.

Ris P.