News:

www.W116.org - The #1 resource for our W116! Established 2004

Main Menu

High oil pressure/gauge issues - 280SE

Started by Feather535, 19 September 2022, 11:38 PM

Feather535

On the 280SE I revived after 10 years of sitting, the oil pressure gauge sits at 0 with the engine off, then climbs to the top of the scale as soon as the engine starts and stays there.  I just changed the engine oil, but the gauge does the same thing. 

With electric instruments, I tend to be as suspicious of the sender and the gauge as I am of the problem the gauge is supposed to indicate, so I'm wondering if anyone here has experience with this issue.  I don't even know if the gauge is electric.   
--------
1977 280SE
1983 300D (sold)
1988 BMW 535is
1999 E320T (sold)
2009 E350T (wife's)

daantjie

This is normal behaviour.  The gauge should peg at max during warm up, then with fully hot engine at idle (foot off accelerator) the reading should drop, but again peg at max when you apply throttle.
Daniel
1977 450 SEL 6.9 - Astralsilber

raueda1

Quote from: Feather535 on 19 September 2022, 11:38 PMI don't even know if the gauge is electric. 
It's not electric.  It connects directly to the engine oil gallery by a tube to a fitting at the top rear of the block (on V8).
-Dave
Now:  1976 6.9 Euro, 2015 GL550
Before that:  1966 230S, 1964 220SE coupe, 1977 Carrera 3.0