News:

The ORG - 100% FREE advice!

Main Menu

Ignition barrel replacement

Started by nathan, 30 December 2021, 10:29 AM

daantjie

#30
Quote from: UTn_boy on 05 January 2022, 12:05 PM
The circlip only holds the core in.  For this type, there will be a little spring loaded pin you push in on the area behind the instrument panel.  Rather than trying to explain in detail in another short novel, I'll try to get some pictures to post later today.

Thanks Aaron, much appreciated ;)  No rush, this one is low on the list (for me at least ;D)
Cheers
Daniel
1977 450 SEL 6.9 - Astralsilber

nathan

a quick couple of picks. I had written on these I pulled them out of a gwagen 460, early 6.9 and not sure of the other!

1979 116 6.9 #6436
2018 213 e63
2011 212 e63
2011 463 g55
2007 211 e500 wagen
1995 124 e320 cabriolet
1983 460 300gd
1981 123 280te

daantjie

I am pretty sure mine is the same as your one stamped with "Neiman 160".  If you look at my last pic I posted you will see the "160" on the outer rim of the face.
Daniel
1977 450 SEL 6.9 - Astralsilber

nathan

I imagine you release the lock via that hole on the side which would be a bastard, as it means the lock mechanism has to be out to release it! Ive never tinkered with one of these yet but UTN will give the word I trust.
1979 116 6.9 #6436
2018 213 e63
2011 212 e63
2011 463 g55
2007 211 e500 wagen
1995 124 e320 cabriolet
1983 460 300gd
1981 123 280te